Ultimate 11 Piece Dip Powder Starter Kit – Choose Color

(1 customer review)

$95.00

Categories: ,

Description

Sparkle & Co. 11 Piece Dip Powder Starter Kit:

(1) Orange/Black 3 Sided Buffer: Medium/Fine; Grit: 100/180 – for use buffing nails smooth, after all Dip coats and Promoter has been applied

(1) Black Banana File: Grit 180/180 – for use shaping the arch of the nail and sides/tips

(1) Rectangular File: 80/80 Grit (very tough) – for use ONLY at the removal step when filing off gloss coat before acetone

(1) Pink Duster Brush

(1) pH Prep (Neutralizer)

(1) Base Bond (Glue)

(1) Solidify (Drying Liquid)

(1) Glossy Coat (Top Coat)

(1) 1oz. (worth 25 manis) Dip Powder: Choose any available Sparkle dip powder color and mention your color choice in notes field above.

(1) Oil (Cuticle Oil and Rim Protector – use around rim before shutting Base Bond and Glossy Coat each time to allow easier opening next time you use it).

(1) Removing Dish

ABSOLUTELY NO LED OR UV LAMP USED FOR THIS PRODUCT!

Innovative, Incredibly Easy & Super Fun!

There are over 100 TOTAL Colors Available (including French White, Light Pink, Dark Pink; Crystal Clear, and colors from our Fierce line)

Instructions:
STEP 1: Sanitize work area, client’s hands and your own.
STEP 2: Cut and file nails to desired shape (square or round), push back cuticles
& trim if necessary.
STEP 3: Gently roughen the entire nail bed with a nail buffer to remove the
excess cuticle and shine from the nail bed.
STEP 4: Remove dust with nail brush.
STEP 5: Gently shake powder jar to loosen powder from settling and then open
jar.
STEP 6: Apply pH Prep to entire nail bed.
STEP 7: Apply a thin coat of Base Bond and then: dip finger/nail into powder,
tap off excess with another finger (don’t tap on the jar as this could cause the jar
to tip over). Repeat this on each nail, one at a time.
You can use a nail brush gently to brush off extra powder on fingers/hands.
Make sure to wait a few seconds after dipping, before brushing away
dust (to ensure dryness).
STEP 8: Repeat Step 7. (If you have very weak/flexible/brittle nails or you are super
tough on your nails, you may want to do 3-4 coats. As long as you apply thin coats
of Base Bond, your end look will still be thin and not look too thick)
You could use 1-2 coats of Crystal Clear powder and 2 coats of color powder
if you did not want to darken the color too much).
STEP 9: Apply Solidify generously to all nails and let dry at least 30 seconds.
Preferable drying time is 1-3 minutes.
STEP 10: Gently buff nails (entire surface) and file edges if necessary. NOTE:
Gently use drill or file as close to the cuticles and sides of nail as possible to
ensure smooth edge grow-out.
STEP 11: Wash hands and dry thoroughly.
STEP 12: Apply Solidify. Let dry 30 seconds.
STEP 13: Apply 2 coats of Glossy Coat to all nails and let dry for 3 minutes. Make
sure to also seal the free edges with both coats. NOTE: Apply one coat to all ten
nails and then immediately apply the second coat to all ten nails. The three
minutes for drying is after the second coat.
STEP 14: After nails are fully dry, apply oil/lotion to cuticles/hands if preferred.
STEP 15: Much later – when thoroughly dry, file again to shape if necessary. That’s it! Now you have gorgeous, rock hard, natural looking nails that are super shiny!! Get ready for lots of compliments!!

This lasts 2-3 Weeks and can be re-filled!

1 review for Ultimate 11 Piece Dip Powder Starter Kit – Choose Color

  1. Brianne a (verified owner)

    This starter kit is the way to go! It comes with everything you need to start your dipping obsession with Sparkle and Co!! I’ve been using this brand since I started 6 months ago and I’ve used all of the products it comes with every time I do a new mani!

Add a review

Your e-mail address will not be published. Required fields are marked *

Cart : 0 items - $0.00